Meny
Søk
Logg inn

Fiio BTR1 trådløs Bluetooth DAC aptX

Trådløs Hi-Fi DAC og forsterker. Handsfree og Bluetooth med aptX

Varenummer: 964338 / Produktnr.: FIIO BTR1

Flere bilder av Fiio BTR1 trådløs Bluetooth DAC aptX

749,-
+ frakt fra 39,-
eller
med ditt lagrede kort
med gebyrfri faktura Se fakturavilkår
Ikke på lager. 5 stk. forventes sendingsklare 1.mar.2019 (usikker dato)
60 dagers åpent kjøp og gratis retur
Fri frakt over 1 000,-
Gjennomsnittlig vurdering (1 stk)
Retningslinjer for produktanmeldelser

FiiO BTR1

Wireless high-fidelity audio with DAC + aptX Bluetooth amp

A great Bluetooth experience starts with the DAC

The BTR1 uses the high performing AK4376 DAC to perform digital decoding duties. Compared to the typical Bluetooth integrated solution, its decoding capability (up to 384 kHz / 32 bit audio) as well as its output power and signal-to-noise ratio are all noticeably better. All of this ensures a stable, high quality Bluetooth audio experience that will bring you closer to how your music was intended to be heard.

Simply plug-and-play for high quality Bluetooth sound

With more and more smartphones starting to discard the traditional 3.5mm headphone jack, the only ways to use your old headphones with such smartphones are to either connect them using an adapter cable, an external DAC /amplifier (such as the FiiO Q1 Mark II), or through some kind of Bluetooth receiver. With the BTR1, simply connect your great- sounding 3.5mm headphone to it and instantly get superb sound, even if your smartphone doesn't have a headphone jack. 

Unchained from wires to unleash your music

Have you ever wished that you didn't need to hold your music player when exercising? Or have you ever worried about answering the phone because both of your hands were busy at the time? With the FiiO BTR1, worry not – you can now truly enjoy the convenience of going wireless without compromises. While ordinary Bluetooth receivers just focus on being small, the BTR1 is also designed to be easy to handle and sound good too within a compact package.

Support for Bluetooth 4.2 and voice calls

Using a new Bluetooth chip architecture, the BTR1 supports Bluetooth 4.2 with an effective transmission distance of up to 10 meters as well as the SBC,   AAC and aptX audio formats. The BTR1 also supports Bluetooth voice calls with its built-in omnidirectional microphone    , that captures audio with equally high quality as that typically used in phones.

*1. AAC audio format is supported by Version 2.0 *2. Microphone is located on the back of the unit

Compatible with Android and iOS devices,  as well as TRS and TRRS headphones

Not only is the BTR1 compatible with both iOS and Android devices, it also supports TRS and TRRS headphones.

(*The BTR1 is designed with controls and microphone, so the in-line controls and microphone on the headphone are not available when using with the BTR1.)

Keep playing and playing

The built-in rechargeable lithium battery can be fully charged in just 2 hours, and can last more than 8 hours when being used. No need to ever worry if you are going to run out of high-quality sound.

Be fully in control with clear status indicators

The blue and red lights on the BTR1 let you know instantly if your unit is on, pairing, under low battery, or charging with a simple glance.

Strong and compact all-aluminum body

The BTR1 comes in a sleek aluminum alloy body finished in black, giving robust yet attractive look. Its compact yet stylish package means you can either just put it in your pocket, clip it onto your coat pocket or backpack shoulder strap, or even attach it to your shirt pocket. 

Listen to music while easily answering calls

With the BTR1, not only can you enjoy your music but you can also easily answer any calls

Easy-to-use 3 button design

On the front of the BTR1 is a single button with which you can: turn on/off the unit, play/pause, pair with another Bluetooth device, answer/hang up the phone, activate EQ, and other commonly-used operations. Located on the side are two volume keys that are designed to be easily felt and used without looking at them.

Reverb and 3D Sound Effects

With the BTR1's ability to apply various effects to your sound, those who love to play games or watch movies can get a more immersive experience that places them right in the middle of the action.

(*Double click the round button to turn on the sound effects - a green light will illuminate)

Generelt
Garanti (måneder) 24
Produkttype Hodetelefonforsterker
Bredde 2.4 cm
Dybde 1.15 cm
Høyde 5 cm
Vekt 20.5 g
Innbyggingsmateriale Aluminiumslegering
Lydsystem
Lydmodus Stereo
Lydspesifikasjoner Forsterker SNR: 95 dB THD: 0.04%
Andre egenskaper DAC-høyttalersystem, innbygd klips, innebygd mikrofon, aptX Low Latency Broadcast Audio Stream
Forsterker
Utgangseffekt 30 mW
Koblinger
Koplingstype Hodetelefoner (minijack stereo 3,5 mm)
Batteri
Intern Batteri Oppladbar
Inkludert antall 1
Kapasitet 205 mAh
Levetid (inntil) 8 time(r)
Oppladingstid 2 time(r)